Aluminum TIG Tips I Learned Making TIG Finger Displays

Aluminum TIG Welding Tips - AC Frequency Settings, Pulse Settings, Tack Welding I would like to get my TIG Finger® in more local welding supply stores so I made a...

Jody Collier | March 1, 2026

TIG Aluminum for Beginners - Beads without Filler Rod

This page goes with our "How to TIG Weld Aluminum" beginners guide. If you landed here on accident, here are some good links for other tig welding posts How to...

Jody Collier | February 21, 2026

10 Rules of the Road for TIG Welding Aluminum

10 "Rules of the Road" for TIG  Welding Aluminum Rule #1  Only weld aluminum that is weldable. No technique or cleaning method matters much if the aluminum is not weldable. ...

Jody Collier | February 14, 2026

Aluminum Butt Joint and Tee Joint Techniques and Settings

Aluminum Butt Joint and Tee Joint 1/8" thickness Aluminum butt and tee. 140 amps using foot pedal (actual amperage used around 115-135) 6 Stubby Gas Lens 3/32" 2% lanthanated 3/32"...

Jody Collier | February 12, 2026

Padding and Stacking Aluminum Beads

Padding Beads on  aluminum If you are new to TIG welding aluminum and want to get better quickly without spending a lot on practice metal, this is for you. Padding...

Jody Collier | February 12, 2026

Back to Basics TIG Welding Aluminum

Back to Basics: TIG Welding Aluminum How to TIG weld aluminum How to TIG weld stainless steel How to TIG weld carbon steel Aluminum TIG welding has a reputation for...

Jody Collier | January 4, 2026

Ten "RIGHTS" of TIG Welding Aluminum

TIG Welding Aluminum  Do these 10 Things Right and You Won't go Wrong   1. Right metal prep ..Make sure metal is clean enough How clean is clean enough for...

Jody Collier | December 24, 2025

MasterClass in TIG Welding Aluminum all in One Video

This is the Video on How to TIG Weld Aluminum I Wish I had when I was learning.The Video above explains and Demonstrates everything listed below and more. Simplified settings...

Jody Collier | November 17, 2025

Want better aluminum welds?

Want better aluminum welds? Don’t Strike an Arc Until You Test Your Argon Flow Learn more about this Prime Welder 325 aka PrimeWeld TIG325x How to TIG weld aluminum How...

Jody Collier | September 1, 2025

Weldmonger Podcast #2 with @deepsouthdimestacker Brad Goodman

Thanks for listening to and watching episode #2 of the Weldmonger Podcast with special guest Brad Goodman aka @deepsouthdimestacker on Instagram. In this Episode, we talk TIG welding aluminum and...

Jody Collier | August 28, 2025

.063" Aluminum Corner TIG Settings - Quick Set Video

How to TIG weld aluminum How to TIG weld stainless steel How to TIG weld carbon steel Having the exact Settings won't turn a bad welder into a good welder...

Jody Collier | August 23, 2025

TIG Tips - Aluminum Lap Joints

This video on TIG welding Aluminum Lap joints shows up close arc shots along with a technique that might help you avoid dipping your tungsten My settings and details for...

Jody Collier | May 2, 2025

TIG Aluminum Travel Speed & Feeding the Filler Rod

Jody Collier | February 9, 2025

#7 Clear Cup Combo Kit For Aluminum

Lucky 7 Clear Cup Combo  Kit on Aluminum For quality Welding Gear https://weldmongerstore.com/ There are lots of opinions on what is the best tig cup for aluminum. Some prefer a...

Jody Collier | February 4, 2025

When to use 5356 vs When to use 4043 Filler Rod

When to use 4043 and when to use 5356 for TIG welding aluminum 4043 and 5356 are by far the 2 most commonly used filler metals for tig welding aluminum. If...

Jody Collier | September 30, 2024

TIG Aluminum 3G Butt Joint Full Penetration

I don't think you will find a better video anywhere on a full penetration butt joint on 1/8" (.125") 3.2mm thick aluminum. Settings matter and they are listed in the...

Jody Collier | September 22, 2024

PrimeWeld TIG 325x AC frequency settings

  learn more about the accessories used in this video. Primeweld tig325x TIG finger® and XL version The Weldmonger 9/20 torch gas lens kit  Stronghand Tools ARW16 rest and MRT50...

Jody Collier | June 4, 2024

TIG Welding Carbon Steel, Chromoly, Stainless, Aluminum, and Titanium

Our Weldmonger TIG pro kit has a cup for every situation.   Sometimes I get asked "What is the best all around TIG cup?" and of course the answer is...

Jody Collier | April 5, 2024

AC Frequency Settings for Stacking Beads on Aluminum

AC frequency settings for aluminum using the prime welder 225x and 325x aka PrimeWeld TIG225x & 325X Aluminum build up using different AC frequency settings with the Primeweld TIG325x (aka...

Jody Collier | November 18, 2023

TIG welding 5052 Aluminum Dog feeder project.

Jody Collier | September 15, 2023