Why You Need an AC/DC TIG Welder for Aluminum There are 2 main ways to weld aluminum. MIG with either a spool gun or push pull gun TIG using alternating current AC TIG welding with an AC/DC TIG welder is...
When to use 4043 and when to use 5356 for TIG welding aluminum 4043 and 5356 are by far the 2 most commonly used filler metals for tig welding aluminum. If fact, according to this handy Hobart Filler Metal chart, 85% of the...
Here are 2 great videos on TIG welding aluminum. Sometimes, there is just no good place to prop your hand. Aluminum can get really hot..really quick and its tough to concentrate on your weld while your knuckles are smoking....
I don't think you will find a better video anywhere on a full penetration butt joint on 1/8" (.125") 3.2mm thick aluminum. Settings matter and they are listed in the video but what is every bit as important as settings...
learn more about the accessories used in this video. Primeweld tig325x TIG finger® and XL version The Weldmonger 9/20 torch gas lens kit Stronghand Tools ARW16 rest and MRT50 tig torch holder 3/32" 2% lanthanated tungsten 1/8" 4043 filler...
this project is a TIG finger display made from .063" thick aluminum tread plate. I welded this project using the PrimeWeld TIG325x at around 150hz on AC frequency setting. I am trying to get my TIG fingers® into local...
