PrimeWeld TIG225X AC/DC TIG Welder With Pulse Now Available at Weldmonger.com

Currently, Shipping is unavailable to these locations: International; Including Canada, Australia, UK. United States; Hawaii, Guam, US Virgin Islands. We are working on making these machines available to your locations in the near future. 

Ready to weld out of the box and includes:

• CK Worldwide Superflex TIG Torch - Flex head torch with CK Superflex hose, Includes CK Dinse connector

• Ground Clamp with 12 ft cable

• Electrode Holder with 12 ft cable

• 220V to 110V Power Adapter

• Foot Pedal Amperage Controller

• Gas Regulator

• TIG Torch Consumables Kit - Cups: #5, #6, #7, Collets: 1/16", 3/32", 3/32" collet body, Grey tungsten electrode (3/32" × 175mm), Short back cap and long back cap

• Argon Hose

• Hand-Held Welding Mask

• Hammer Brush

• Torch Switch

• User Manual

• *Optional Weldmonger Kit - Select from the Options above

*Weldmonger Kit is optional, select 'Base' from the options above to purchase the base package only*

The PrimeWeld TIG225X AC/DC TIG Welder with Pulse is priced like an entry level tig welder but it is much more than that.

It's a full featured machine with ac balance, ac frequency, and pulse settings along with a 10 amp low end start for thin metals.

I have used a lot of different tig welders over the years and one of the problems with affordable tig welders has been the torch and foot pedal.

They are often just not good. And sometimes they are really bad.

Not so with this primeweld machine.

The PrimeWeld TIG225X comes with a genuine CK worldwide 17 style air cooled torch with super flex cables. ( once you use super flex, its hard to go back to standard cables).

And…it also comes with a very nice foot pedal that is smooth and responsive.  

I first learned about the primeweld TIG 225x on a YouTube channel that you may already know about. The channel is called 6061.
I highly encourage you to check him out.
This is what caught my attention…
A comment from Aaron himself
  
“This is an unbiased review. The welder was sent to me to test and review by the manufacturer. They did not pay me any money. I told them if I liked it, I'd make a review video and possibly use it in a few upcoming videos. I also told them if I didn't like it, I'd send it back and not make a video and they'd have to pay for shipping. I ended up liking it, so I made this video.”

I thought it was interesting that a highly respected welder fabricator was giving this welder high marks.

So I asked PrimeWeld to send me one to try.
I was very happy to see a genuine CK TIG torch and SSC style foot pedal when I unboxed it.

After putting some time in on the PrimeWeld TIG 225x, and also talking to the owner about his customer support policies, I’m happy to say that I am now offering this machine for sale on my store at weldmonger.com

Oh and by the way, the very first upgrade I always recommend to folks getting a new tig welding machine with an air cooled 17 style torch  is our Weldmonger Stubby Gas Lens Kit.

Take Your TIG Welding to a Whole New Level of Quality

A pulsed AC/DC TIG welder offers the highest quality control on aluminum, producing beautiful welds. The PrimeWeld TIG225X features a full spectrum of adjustments to tune your arc characteristics. From the power level when striking the arc to Pulse Width Modulation that manages depth and width of penetration, you're able to control every aspect of your machine.

AC BALANCE FEATURE REMOVES OXIDATION AND IMPURITIES

The AC Balance feature lets you set the length of time spent on each side of the AC cycle, cleaning oxidation from the surface and impurities from the weld puddle. By varying the amount of time the signal is negative or positive, you can change the degree of “stir” in the weld puddle.

FINE TOUCH AND LOW HEAT FOR SHEET METAL

DC TIG provides the low-temperature control you need for sheet metal or car bodies. For thicker material, an AC/DC TIG welder making 225 amps can weld 1/2-inch metal. No other welding process out there can match exposed TIG welds’ beauty. It’s the choice method for the open framework joints, such as bicycle frames and metal sculptures.

STICK MODE FOR QUICK ACTION

Stick mode saves costs on shielding gas when you don’t need that TIG finesse. Flip a switch to make fencing and equipment repairs with DC stick welding up to 180 amps. The TIG225X will make short work of any metal up to 1/2-inch thick.

This machine lasts under rugged real-world conditions, just like every PrimeWeld product. The TIG225X AC/DC welder with Pulse is the best TIG welder for your money in its price range.

BACKED BY PRIMEWELD’S LEGENDARY SUPPORT AND NO-HASSLE 3-YEAR WARRANTY!

Our customer service makes it easy to connect with our team of GENUINE PEOPLE, who provide helpful advice and know-how to troubleshoot every PrimeWeld model for optimum performance.