Furick #8 Pro Cup 4-Pack: Works With #9/20 Torches w/o Adapter and #17/26 Torches w/ Adapter Kit
| Weldmonger Warehouse |
Furick #8 Pro Cup 4-Pack
The #8 Pro Cup works on DC and AC power with a 200 amp rating and has an inner diameter of .50"/12.5mm. These #8 size cups are a great all around size for most industrial, Hot Rod and hobbyist welding applications!
Note: clear cups are not for "walking the cup."
The Furick #8 Pro Cup works with most torches. For the smaller #9 and #20 style torches you'll need a 45v44 style gas lens, and with #17 or #26 Style torches, you'll need the Furick Adapter Kit which includes a 3/32" (2.4mm) setup . Click here for more information.
Watch the Furick #8 Pro Welding Cup in Action!
Will this cup fit your torch? Watch this video and find out.
This video is from our Welding Tips & Tricks YouTube channel featuring the Furick #8 Pro Welding Cup being put through its paces!
If you have a #17, #18 or #26 size torch you will need an adapter kit.
If you have a #9 or #20 torch you will need to have a 45V44 gas lens. If you have one already, it should work, however keep in mind that generic brands often yield poor gas shielding. You do not need an additional diffuser screen for the Furick #8 cup. The 45v44 already has the diffuser screen built in. This also applies for the gas lens included in the adapter kit for #17, 18, & 26 style torches.
What Series/Number is my Torch? Knowing the style of your torch takes the guesswork out of finding consumables and replacement parts.
2 Series(#9/#20): Torches include 9, 20, 100, 110, 130, 200, 230FL2L, CKM230, CWH230, WCM230 torches and other popular torches of Weldcraft, Lincoln, WeldTec and Profax with similar models.
3 Series(#17/#18/#26): Torches include 17, 18, 26, 150, 210, 300, 510, Trimline, FL3L, CKM350, CWHTL300, CWH350, CWM350 and other popular torches of Weldcraft, Lincoln, WeldTec and Profax with similar models.
If you need any more help finding out what style torch you have, contact Weldmonger now at (833)-308-7018
Using the Furick cup has made being able to see the weld pool much easier. Now I would like to see a full range of the Furicks available.
Really helps me see my work. Works great. I have only used it on aluminum so far but it works very well.
I’m a pretty new tig welder and I have really enjoyed using the gas lense as aposed to a traditional collet body.
I have only used one of these cups for a couple short welds on a shelf bracket. It instantly became my favorite torch set up!!
Been welding all these years and thought I'd finally try one of these. Now I'm kicking myself for waiting so long. They are nice! The cup is easy to install and provides more visibility during welding. It's your turn now.