When to use 5356 vs When to use 4043 Filler Rod
When to use 4043 and when to use 5356 for TIG welding aluminum 4043 and 5356 are by far the 2 most commonly used filler metals for tig welding aluminum. If...
Jody Collier |
-
When to use 5356 vs When to use 4043 Filler Rod
-
TIG Techniques for Limiting Distortion and Avoiding Cracks
TIG Techniques for Limiting Distortion and Avoiding Cracks
This video shows Techniques for Limiting Distortion and Avoiding Cracks The backstep technique is when you weld a short section and then back up behind that weld and make another short...
Jody Collier |
-
PrimeWeld TIG325x, AC Frequencies, & Clear Cups
PrimeWeld TIG325x, AC Frequencies, & Clear Cups
AC Frequency settings of 150hz and higher can really help focus the arc cone. It seems to work a lot like using high speed pulse settings for steel. In this...
Jody Collier |
-
1/4" Aluminum Lap Joint Techniques - PrimeWeld TIG325x
1/4" Aluminum Lap Joint Techniques - PrimeWeld TIG325x
Jody Here, Thanks for tuning in. I made a video talking about a couple deals we have going on at Weldmonger as well as some content on aluminum lap joints....
Jody Collier |
