get your tungsten holder and dual flowmeter here https://weldmongerstore.com/products/weldmonger-dual-output-argon-regulator-flowmeter Sanitary stainless tube welding is all about getting a good purge and a dual flowmeter is the most convenient way to purge and weld with a single tank of argon. Our new Weldmonger® dual flowmeter has a LIFETIME WARRANTY so you can be confident in your purchase. My Good friend Andrew Cardin is doing the welding in this video. Visit my store at https://weldmongerstore.com for TIG cup Kits, TIG Fingers, Gloves, Tungsten, Filler metal, and other quality welding tools. New products being added weekly.

We are fully stocked on TIG kits, Tungsten, Filler metal, gloves, and more so this is a great time to grab some things you need anyway. https://weldmongerstore.com for aluminum corner joints, handrails, sanitary stainless tubing, boiler tubes, 6g pipe tests, preheated pipe, The TIG Finger and TIG Finger XL allow you to prop right next to the heat and hang in there to finish the weld without burns.

Learn more at https://weldmongerstore.com/collections/welding-machines This video is on TIG welding aluminum with the primeweld TIG325x. This VERY Popular TIG welder goes out of stock quite a lot but since it is back in stock I decided to drop this video showing aluminum settings I used for several different welds on different joints and thicknesses. The primeweld TIG 325x has a low 5 amp start on DC as well as great amperage range up to 325amps for thick aluminum. I don't know of any other 325 amp tig welding machine that is this affordable and where the company has a great track record of customer support. Follow me on social media to see what I’m up to: Instagram: https://www.instagram.com/weldmonger/ Facebook: https://www.facebook.com/weldingtipsandtricks

Learn more about welding accessories used in this video at https://weldmongerstore.com for TIG cup Kits, TIG Fingers, Gloves, Tungsten, Filler metal, and other quality welding tools. I made a stand for my milwaukee portaband out of scrap aluminum and welded it using 115 volt power. To get the most out of a tig welder using 115 volt power, you need preheat and a few other tricks like machine settings and weld sequence. Follow me on social media to see what I’m up to: Instagram: https://www.instagram.com/weldmonger/ Facebook: https://www.facebook.com/weldingtipsandtricks

Learn more about welding accessories used in this video at my store https://weldmongerstore.com for TIG cup Kits, TIG Fingers, Gloves, Tungsten, Filler metal, and other quality welding tools. New products being added weekly. Two of the main challenges with tig welding stainless steel are: 1. distortion 2.maintaining stainless properties Stainless steel is not very thermally conductive so heat can build up easily. that is why I always suggest getting a puddle started quickly and getting moving quickly.

Learn more about welding accessories used in this video https://weldmongerstore.com for TIG cup Kits, TIG Fingers, Gloves, Tungsten, Filler metal, and other quality welding tools. New products being added weekly. In this video, I’m welding with the PrimeWeld MTS200 (MTS stands for MIG, TIG, Stick) —running short circuit MIG and lift arc TIG with the walk-the-cup technique, all on one machine. https://weldmongerstore.com/collections/welding-machines/products/primeweld-mts200-200-amp-3-in-1-welder Whether you're new to multiprocess welders or just want to see how this one handles both mig and lift arc TIG welding, this video gives you arc shots, settings, and technique breakdowns for both processes.

Primeweld MTS200 https://weldmongerstore.com/collections/welding-machines/products/primeweld-mts200-200-amp-3-in-1-welder In part 1 of this 2 part video, I tig welded some of the outside corner joints using a torch switch. For this video, I mig welded the rest of the corner welds and also the legs using a primeweld mts200. Visit my store at https://weldmongerstore.com for TIG cup Kits, TIG Fingers, Gloves, Tungsten, Filler metal, and other quality welding tools. New products being added weekly. Follow me on social media to see what I’m up to: Instagram: https://www.instagram.com/weldmonger/ Facebook: https://www.facebook.com/weldingtipsandtricks

Visit my store at https://weldmongerstore.com for TIG cup Kits, TIG Fingers, Gloves, Tungsten, TIG Filler metal, and other quality welding tools. In this project, I’m putting together a simple fire pit using TIG welding — but with a twist! I’ll show you how to tack weld using 2T mode and take advantage of 4T with upslope and downslope for outside corner welds. Perfect for beginners wanting to learn more about torch switches! The pieces for this firepit welding project were cut for me on a CNC plasma table by my good friend Matt Hayden - Welding Instructor at Polk County College And Career Academy. Since this fire pit welding project is intended more for an educational welding video than a project, I decided to use both MIG and TIG welding to make it more educational and entertaining. So I used TIG to tack weld and to also weld some outside corners and then for part 2, I will switch over to mig welding. Follow me on social media to see what I’m up to: Instagram: https://www.instagram.com/weldmonger/ Facebook: https://www.facebook.com/weldingtipsandtricks