Do I Need Pulse on a TIG Welder?
Do I Need Pulse on a TIG Welder? Learn more about this PrimeWeld TIG325x with pulse Best AC/DC TIG Under $1000 How to TIG weld aluminum How to TIG...
Jody Collier |
Do I Need Pulse on a TIG Welder?
-
#8 Customer Video TIG aluminum pulse settings and mig practice
#8 Customer Video TIG aluminum pulse settings and mig practice
I don't often use pulse for aluminum but it is a feature that can help you learn consistency. For the first topic in this video I set the pulse rate...
Jody Collier |
-
-
#7 Customer Video - 303 Stainless and Hot Start for Stick
#7 Customer Video - 303 Stainless and Hot Start for Stick
303 free machining stainless is not recommended for welding but for low stress non critical applications, sometimes we need to weld it. I have tig welded quite a lot of...
Jody Collier |
-
7 Tips (Actually 8) for TIG Welding Aluminum
7 Tips (Actually 8) for TIG Welding Aluminum
7 TIPS FOR TIG WELDING ALUMINUM A simple turn of the AC balance knob can make a huge difference. When you set the AC balance to not enough...
Jody Collier |
-
#6 Customer Video - 2 Tips for TIG Welding Aluminum
#6 Customer Video - 2 Tips for TIG Welding Aluminum
2 tips in this video are: How to get full smooth penetration on a thin aluminum butt joint. How to avoid porosity on an aluminum weld that will be...
Jody Collier |
-
-
#5 Weldmonger Customer Quick Tips Spool Gun & Dual Shield
#5 Weldmonger Customer Quick Tips Spool Gun & Dual Shield
Quick tip #1 Using a cheap jersey glove for your filler rod hand There are no rules to say that you have to use the same type gloves on both...
Jody Collier |
-
-
MIG Travel Speed and Enter the MIG180 GAW
MIG Travel Speed and Enter the MIG180 GAW
MIG welding has a much wider range of travel speed than Stick 1. ALL ORDERS placed before midnight PST 7/7/24 will get a FREE TIG FINGER. I'm on shipping duty, and...
Jody Collier |
-
-
-
Weldmonger Customer Quick Tip Video #4 Stick Welding with TIG torch
Weldmonger Customer Quick Tip Video #4 Stick Welding with TIG torch
Did you know that in a pinch, you can stick weld with a tig torch? All you need to do is use the right size collet body for the size...
Jody Collier |
-
Clear TIG Cups compared to Ceramic Cups
Clear TIG Cups compared to Ceramic Cups
I don't always use clear cups. I still use ceramic cups a lot. But I can tell you one thing... When I go back to a pink ceramic cup, it's...
Jody Collier |
-
#3 Weldmonger Customer Quick Tips #3
#3 Weldmonger Customer Quick Tips #3
Here is another Quick tips video that gets right to the meat. This video is strictly for you weldmonger customer and its unlisted so others cant watch it. One challenge...
Jody Collier |
-
-
Aerospace TIG Practice and a Hack Fixture
Aerospace TIG Practice and a Hack Fixture
Aerospace TIG Practice and a Hack Fixture Jody Here, Around 33 years ago the company I worked for asked me to certify over a 100 welders to mil standard 1595a....
Jody Collier |
-
#2 Quick Tips Video - Stainless holes, MIG settings, & 6011 stick welding #2
#2 Quick Tips Video - Stainless holes, MIG settings, & 6011 stick welding #2
Tip#1 Backing for stainless holes is using aluminum backing for filling a hole in stainless steel. If you try to weld a hole shut in stainless sheet metal without any...
Jody Collier |
-
TIG Settings Made Simple PrimeWeld 225
TIG Settings Made Simple PrimeWeld 225
The best TIg welding machine in the world will not get you the best results if you don't have the right cup for the job. We have made this simple...
Jody Collier |
-
#1 Quick Tips Video #1 - TIG, MIG, & Stick Tips
#1 Quick Tips Video #1 - TIG, MIG, & Stick Tips
First of all , thanks very much for your support. This video is just for you ...because you are a loyal customer. And because you are a loyal customer, We made...
Jody Collier |
-
PrimeWeld TIG 325x AC frequency settings
PrimeWeld TIG 325x AC frequency settings
learn more about the accessories used in this video. Primeweld tig325x TIG finger® and XL version The Weldmonger 9/20 torch gas lens kit Stronghand Tools ARW16 rest and MRT50...
Jody Collier |
-
Aluminum Tread Plate Project
Aluminum Tread Plate Project
this project is a TIG finger display made from .063" thick aluminum tread plate. I welded this project using the PrimeWeld TIG325x at around 150hz on AC frequency setting....
Jody Collier |
-
Titanium Welding Tests D17.1 Aerospace
Titanium Welding Tests D17.1 Aerospace
Maybe you don't weld titanium yet...but the these tips and techniques still apply for taking a welding test for aerospace. Good luck! The Furick SG13 shown below Back around...
Jody Collier |
-
PrimeWeld TIG325x, AC Frequencies, & Clear Cups
PrimeWeld TIG325x, AC Frequencies, & Clear Cups
AC Frequency settings of 150hz and higher can really help focus the arc cone. It seems to work a lot like using high speed pulse settings for steel. In this...
Jody Collier |
-
1/4" Aluminum Lap Joint Techniques - PrimeWeld TIG325x
1/4" Aluminum Lap Joint Techniques - PrimeWeld TIG325x
Jody Here, Thanks for tuning in. I made a video talking about a couple deals we have going on at Weldmonger as well as some content on aluminum lap joints....
Jody Collier |
-
TIG Welding Hot and Fast on Carbon Steel
TIG Welding Hot and Fast on Carbon Steel
Here is a short video on tig welding a carbon steel Tee joint. Just a quick reminder that we have couple of deals still going on. Free stronghand tig...
Jody Collier |
-
-
TIG Welding Carbon Steel, Chromoly, Stainless, Aluminum, and Titanium
TIG Welding Carbon Steel, Chromoly, Stainless, Aluminum, and Titanium
Our Weldmonger TIG pro kit has a cup for every situation. Sometimes I get asked "What is the best all around TIG cup?" and of course the answer is...
Jody Collier |
-
Aluminum Welding Project
Aluminum Welding Project
This video is a TIG Welding Project using .090" 5052 aluminum PS. Storewide March Rebates End on MArch 31 take advantage of our rebates on Primeweld and CK welding...
Jody Collier |
-
6g Weld Test on 2 inch Schedule 80 pipe - TIG root, fill, & cap
6g Weld Test on 2 inch Schedule 80 pipe - TIG root, fill, & cap
This is a 6g weld test on 2 inch schedule 80 pipe. This particular test is TIG all the way out. Root, fill, and cap all done with ER70S6 1/8"...
Jody Collier |
-
Merry Christmas Discounts & a TIG Video
Merry Christmas Discounts & a TIG Video
Merry Christmas Discounts & TIG Video Here is a link to the TIG Shortcut Guide (primeweld edition)
Jody Collier |
-
Tips for Feeding the TIG rod - How to get Better at feeding Filler wire
Tips for Feeding the TIG rod - How to get Better at feeding Filler wire
Feeding TIG Rod weldmonger® stubby tig gloves white or black The video on this page is about feeding the tig rod and some tips for getting that filler rod hand up...
Jody Collier |
-
TIG Freehand Root Technique - 2G Pipe with hot pass
TIG Freehand Root Technique - 2G Pipe with hot pass
4 inch 2g pipe freehand root pass technique and hot pass. For this video, I am welding a root pass and hot pass in a 4 inch schedule 40...
Jody Collier |
-
Gate Repair - Stick Welding with the PrimeWeld MIG180
Gate Repair - Stick Welding with the PrimeWeld MIG180
Sometimes all you need are a few 6011 stick rods and a 115volt welder and you can make a good weld repairFixing a gate latch that seems to have been...
Jody Collier |
-
AC Frequency Settings for Stacking Beads on Aluminum
AC Frequency Settings for Stacking Beads on Aluminum
AC frequency settings for aluminum using the prime welder 225x and 325x aka PrimeWeld TIG225x & 325X Aluminum build up using different AC frequency settings with the Primeweld TIG325x (aka...
Jody Collier |
-
PrimeWeld TIG325X -5 amp Start, Pulse Settings, and 1/4" Aluminum
PrimeWeld TIG325X -5 amp Start, Pulse Settings, and 1/4" Aluminum
In 2021, PrimeWeld ordered quite a few TIG fingers® from us here at Weldmonger.com and I must say I really appreciated that. I thought it was a stand up move because several other...
Jody Collier |
-
TIG Pro Kit
TIG Pro Kit
Our TIG Pro Kit is like a swiss army knife and has a cup for every metal type and every situation. From now thru October 31, 2023 you can get...
Jody Collier |
-
WELDMONGER® Stubby Gas Lens Kit 2.0 -New and Improved without added cost
WELDMONGER® Stubby Gas Lens Kit 2.0 -New and Improved without added cost
Our new weldmonger stubby gas lens kit stands head and shoulders above the rest and here’s why… We upgraded our kit to use Furick gas lenses with an...
Jody Collier |
-
-
-
3G Plate Open Root - Walk the Cup & Freehand with TIG Finger®
3G Plate Open Root - Walk the Cup & Freehand with TIG Finger®
This is a 3G Open Root plate TIG Welded all the way out using ER70S6 filler rod. Here are the joint details as well as settings used for this joint:...
Jody Collier |
-
-
-
-
-
-
-
-
-
-
