Fireball Tool Magnetic 1-2-3 Blocks - 2-Pack ist auf Lager und wird versandt, sobald es wieder verfügbar ist
This item ships directly from Fireball Tool and is not eligible for Weldmonger free shipping promotions. Shipping is calculated separately at checkout.
Ordering other Weldmonger products? Your order may arrive in multiple shipments.
Fireball Tool Magnetic 1-2-3 Blocks
The Fireball Tool Magnetic 1-2-3 Blocks take the versatility of traditional machinist 1-2-3 blocks and make them even more useful for welding, fabrication, layout, and fit-up.
Precision ground to measure 1" × 2" × 3", these solid steel setup blocks give welders and fabricators a quick, repeatable way to elevate, space, position, and align parts on the welding table. Better yet, Fireball Tool adds powerful rare-earth magnets to three faces, allowing the blocks to hold onto steel workpieces and welding tables while you get everything positioned.
Instead of digging through the scrap bin looking for the right piece of material to use as a spacer, grab a Magnetic 1-2-3 Block and know exactly what you've got.
Each block is ground parallel and square on all six sides, providing reliable reference surfaces for accurate fabrication and layout work.
With three known dimensions—1", 2", and 3"—you can quickly change the height or spacing simply by rotating the block.
Use them for:
Elevating parts above a welding table
Creating consistent 1", 2", or 3" spacing
Positioning crossbars and tubing
Supporting parts during tack welding
Setting up repeatable fabrication jobs
Layout and marking
Holding workpieces off the table for better weld access
Creating temporary stops and reference points
General welding table setup and fixturing
They're one of those simple shop tools that quickly becomes useful on just about every fabrication project.
Fireball Tool flush mounts two powerful rare-earth magnets on each of three faces, while leaving the opposite three faces non-magnetic.
This gives you the choice of using a magnetic or non-magnetic surface depending on how the block is positioned.
On 1/2" thick material, Fireball Tool rates the magnetic pull-away force at over 12 lbs, helping the blocks stay put while positioning parts.
When you're finished, stick them directly to the side or leg of your steel welding table so they're ready for the next job.
These aren't random pieces of steel cut to approximately 1", 2", and 3".
Fireball Tool precision grinds the blocks for accurate fabrication and setup work.
Dimensions: 3.000" × 2.000" × 1.000"
Dimensional Tolerance: Oversized up to 0.0005"
Squareness: ±0.0003" on all sides
Material: Steel
Hardness: 50 HRC
Weight: 1.6 lbs per block
Magnets: 6 rare-earth magnets per block
Magnetic Faces: 3
Non-Magnetic Faces: 3
Pull-Away Force: Over 12 lbs on 1/2" material
The magnets are mechanically installed and can be replaced using the retaining screws if necessary.
Important: Avoid prolonged exposure to temperatures above 175°F (80°C). Excessive heat can permanently reduce the strength of the rare-earth magnets.
Choose the setup that fits your shop:
2-Pack
8-Pack + Case
For everyday fabrication, a pair of blocks gives you two accurate reference points. For larger assemblies and repeatable fixture setups, the 8-pack gives you considerably more flexibility for supporting and positioning multiple parts at once.
Every fabrication shop has a collection of random pieces of steel being used as spacers, risers, stops, and makeshift setup blocks.
The Fireball Tool Magnetic 1-2-3 Blocks give you a faster and far more precise alternative.
Rotate the block to get the dimension you need, use the magnetic faces when you want the block to stay put, and use the precision-ground surfaces as reliable references for your next welding or fabrication setup.
Simple, precise, magnetic, and incredibly useful around the welding table.
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information. If you prefer to pay by phone, call us toll free at 1-833-308-7018
Fireball Tool develops purpose-built tools for welders, fabricators, machinists, and makers who expect more from their shop equipment.
From innovative welding squares and fixture-table systems to clamps, layout tools, hand tools, and shop accessories, Fireball products are designed around solving real fabrication problems.
Weldmonger is proud to offer Fireball Tool products alongside the welding equipment and accessories we use and recommend every day.
Fireball Tool Magnetic 1-2-3 Blocks
Fireball Tool 1826 Combination Square
Fireball Tool Lumber Maximus Clamp 2" x 4" (Single Clamp Set)
Fireball Tool Maximus Bar and Dog Clamp (2 Sets of Clamps)
Fireball Tool Magnetic Hex Key Holder (ABS)
Fireball Tool Mystic Square 16"
Fireball Tool products purchased through Weldmonger are fulfilled and shipped directly from Fireball Tool.
No. Fireball Tool products are excluded from Weldmonger free shipping promotions. Applicable shipping charges are calculated separately at checkout.
Because Fireball Tool products ship directly from Fireball Tool, your order may arrive in multiple shipments.
Yes. Tracking information will be provided once it becomes available for your shipment.
Delivery times depend on your location and selected shipping service. Fireball Tool currently states that processed orders generally take 5–7 business days to arrive.
If you purchased through Weldmonger, contact the Weldmonger team with your order information and we'll help you out.
The Fireball Tool Magnetic 1-2-3 Blocks take the versatility of traditional machinist 1-2-3 blocks and make them even more useful for welding, fabrication, layout, and fit-up.
Precision ground to measure 1" × 2" × 3", these solid steel setup blocks give welders and fabricators a quick, repeatable way to elevate, space, position, and align parts on the welding table. Better yet, Fireball Tool adds powerful rare-earth magnets to three faces, allowing the blocks to hold onto steel workpieces and welding tables while you get everything positioned.
Instead of digging through the scrap bin looking for the right piece of material to use as a spacer, grab a Magnetic 1-2-3 Block and know exactly what you've got.
Each block is ground parallel and square on all six sides, providing reliable reference surfaces for accurate fabrication and layout work.
With three known dimensions—1", 2", and 3"—you can quickly change the height or spacing simply by rotating the block.
Use them for:
Elevating parts above a welding table
Creating consistent 1", 2", or 3" spacing
Positioning crossbars and tubing
Supporting parts during tack welding
Setting up repeatable fabrication jobs
Layout and marking
Holding workpieces off the table for better weld access
Creating temporary stops and reference points
General welding table setup and fixturing
They're one of those simple shop tools that quickly becomes useful on just about every fabrication project.
Fireball Tool flush mounts two powerful rare-earth magnets on each of three faces, while leaving the opposite three faces non-magnetic.
This gives you the choice of using a magnetic or non-magnetic surface depending on how the block is positioned.
On 1/2" thick material, Fireball Tool rates the magnetic pull-away force at over 12 lbs, helping the blocks stay put while positioning parts.
When you're finished, stick them directly to the side or leg of your steel welding table so they're ready for the next job.
These aren't random pieces of steel cut to approximately 1", 2", and 3".
Fireball Tool precision grinds the blocks for accurate fabrication and setup work.
Dimensions: 3.000" × 2.000" × 1.000"
Dimensional Tolerance: Oversized up to 0.0005"
Squareness: ±0.0003" on all sides
Material: Steel
Hardness: 50 HRC
Weight: 1.6 lbs per block
Magnets: 6 rare-earth magnets per block
Magnetic Faces: 3
Non-Magnetic Faces: 3
Pull-Away Force: Over 12 lbs on 1/2" material
The magnets are mechanically installed and can be replaced using the retaining screws if necessary.
Important: Avoid prolonged exposure to temperatures above 175°F (80°C). Excessive heat can permanently reduce the strength of the rare-earth magnets.
Choose the setup that fits your shop:
2-Pack
8-Pack + Case
For everyday fabrication, a pair of blocks gives you two accurate reference points. For larger assemblies and repeatable fixture setups, the 8-pack gives you considerably more flexibility for supporting and positioning multiple parts at once.
Every fabrication shop has a collection of random pieces of steel being used as spacers, risers, stops, and makeshift setup blocks.
The Fireball Tool Magnetic 1-2-3 Blocks give you a faster and far more precise alternative.
Rotate the block to get the dimension you need, use the magnetic faces when you want the block to stay put, and use the precision-ground surfaces as reliable references for your next welding or fabrication setup.
Simple, precise, magnetic, and incredibly useful around the welding table.
PACK
