TIG Welding Stainless - TWO Main Concerns

The 2 Biggest Challenges When TIG Welding 300 Series Stainless Steels: 1. Maintaining Stainless Properties 2. Distortion Control TIG welding 300 series stainless steels—like 304, 316, and 321—requires a level...

Jody Collier | 1. Juni 2025

Mig Welding for Beginners

Take advantage of our Summer Deals Setting up a mig welder. (in this video the Primeweld MIG180) If you are thinking you would like to learn how to mig weld...

Jody Collier | 30. Mai 2025

MIG & Lift Arc TIG - PrimeWeld MTS200

Here is a Quick Video on MIG Welding a Simple Lap joint. Since the Welding machine I used also does Lift Arc TIG, I added some Walking the Cup shots....

Jody Collier | 23. Mai 2025

Fire Pit Project part 2- MIG welding with Primeweld MTS200

MIG Welding with the PrimeWeld MTS200 In part one of this 2 part series, I tack welded the pieces together using a torch switch and the 2t setting.  Then I...

Jody Collier | 21. Mai 2025

Fire Pit Project Part 1

Fire Pit Build Part 1 Getting the most out of a TIG Torch Switch using 2t and 4t functions The pieces for this fire pit welding project were cut for...

Jody Collier | 9. Mai 2025

TIG Welding Accessory List

  Are you looking to take your TIG welding skills to the next level? Watch this quick TIG Tips Video about the Big Mistake a lot of folks make on...

Jody Collier | 9. Mai 2025

What is a # 9 TIG Torch?

If you are not 100% sure about what a  9 TIG torch is, watch this video and you will be know the difference in a 9 tig torch and the...

Jody Collier | 8. Mai 2025

TIG Finger = Prop in Your Pocket

TIG finger propped right next to red hot weld TIG finger and XL Version Propping and Sliding right next to HOT Aluminum weld with a TIG finger This Turntable Weld...

Jody Collier | 7. Mai 2025

Clear TIG Cups in Action – Better Visibility = Better Welds

Welding with Clear TIG Cups can be a Game Changer Watch this Video and then Decide if a Clear Cup kit might help you   Our Clear Cup Navigator Kit...

Jody Collier | 5. Mai 2025

Best TIG Welding Gloves - What does Best even mean?

If you are like me, you probably don't care about designer clothes. Same thing goes with TIG welding gloves.   I just want my tig gloves to be comfortable, durable, and...

Jody Collier | 4. Mai 2025

TIG Tips - Aluminum Lap Joints

This video on TIG welding Aluminum Lap joints shows up close arc shots along with a technique that might help you avoid dipping your tungsten My settings and details for...

Jody Collier | 2. Mai 2025

#12 TIG Cup - aka The Fantastic Furick Fupa 12

#12 TIG Cup - aka the Furick Fupa 12  Here is a quick story about how I learned that a #12 TIG cup could help improve my welds. Way back...

Jody Collier | 1. Mai 2025

17 TIG Torch, Cups that Fit, & Number ONE Tip for Aluminum

How to be 100% Sure a Gas Lens Cup will fit your 17 TIG Torch I love a CK 17 TIG Torch with SuperFlex hose for its simplicity . But...

Jody Collier | 24. April 2025

17 Series TIG Torch and Our Navigator KIT

Both 17 and 26 tig torches use the same cups and hardware The main differences between a 17 series TIG torch and a 26 series TIG torch come down to size,...

Jody Collier | 23. April 2025

Purge Tips and Weldmonger® Dual Flowmeter

Purge Tips and Weldmonger® Dual Flowmeter Order your weldmonger dual flowmeter with lifetime warranty Stainless Steel needs argon purge gas for full penetration welds in order to maintain corrosion resistance....

Jody Collier | 22. April 2025

2 inch Pipe 2G TIG Root-Fill-Cap

2 inch pipe welding  2g pipe welding is when the axis of the pipe is vertical and the weld is horizontal. This is a very common weld for boilermakers except...

Jody Collier | 22. April 2025

Proper Torch Angle for TIG Welding vs Whatever it Takes

What is the proper Torch angle for TIG welding? Is there even a proper angle?  Does it really matter that much? Text books tell us that the proper torch angle...

Jody Collier | 21. April 2025

Weldmonger Dual Flowmeter with LIFETIME Warranty

Dual flowmeter  Get your weldmonger dual flowmeter here   There are 2 main reasons why you need a dual flowmeter: to purge stainless steel pipe or sanitary tubing or other...

Jody Collier | 20. April 2025

Weldmonger/Furick Arsenal Kit

 Enhance Your Welding with our Weldmonger/Furick Gas Lens Kit  Enhance Your Welding with our Weldmonger/Furick Arsenal Gas Lens Kit ar·se·nal = a collection of weapons Are you tired of dull...

Jody Collier | 19. April 2025

How NOT to Weld Aluminum PLUS Down&Dirty tips

How NOT to TIG Weld Aluminum & Down&Dirty tips The video above shows one of the BIGGEST problems with aluminum fillet welds and how to Fix it. Getting started off...

Jody Collier | 17. April 2025

How to Hold a TIG Torch

There is no right or wrong way to hold a tig torch. Whatever it takes. In this video, I hold a tig torch a certain way for bench work, but for...

William Collier | 17. April 2025

Arc Control Setting for Stick Welding

Let’s break down what the Arc Control setting—also known as Arc Force or Dig—does on a stick welding (SMAW) machine and how to use it effectively.  What Is Arc Control...

Jody Collier | 16. April 2025

Stainless Steel Pipe - Root pass tips and Walking the Cup Video

Stainless Root Tips Video with Walking the Cup Bonus Video Bridge Tacks are useful for tack welding stainless pipe without needing to purge the inside with argon. Penetrated tacks are...

Jody Collier | 15. April 2025

Titanium Welding

Three of my best videos on Titanium welding. If you are fairly new to welding Titanium, these 3 videos will give you a great foundation 1G titanium weld test.  A...

Jody Collier | 15. April 2025

How to TIG Cast Iron with Aluminum bronze Filler on AC

There are several ways to tig weld cast iron but I have had really good results tig brazing cast iron using AC and Aluminum bronze filler rod.  ( thats ErCu-Al-A2)...

Jody Collier | 13. April 2025

TIG Welding Cold Rolled Steel vs 4130 or Hot Rolled Steel

TIG Welding Cold Rolled Steel vs 4130 or Hot Rolled Steel Have you ever noticed that when you are tig welding cold rolled steel that sometimes the puddle wanders? I...

Jody Collier | 12. April 2025

TIG Welding Carbon Steel vs 4130 Chromoly

If you can tig weld low carbon steel like AISI 1010-1020 you can tig weld 4130 chromoly. These 3 Videos will show the subtle differences    Video #1 TIG Welding...

Jody Collier | 10. April 2025

How to TIG Weld Cold Rolled Steel. Bonus video on TIG Welding Steel Tubing

Using a Furick Ceramic #12 to tig weld corner joints and lap joints. hope this helps, Jody In this video, I am demonstrating how to tig weld cold rolled steel corner...

William Collier | 9. April 2025

TIG Welding 4 Corner Welds on Cold Rolled Steel

  Comparing Pulse Settings vs no pulse on outside corner joints on cold rolled steel 11ga  0.120” (3mm) For this video, I compared 2 welding techniques on outside corner joints...

Jody Collier | 6. April 2025

Carbon Steel Fillet Welds and More...

Carbon Steel Fillet Welds and a Back to Basics Video for TIg Welding Carbon Steel Low carbon steel also known as mild steel is often the very first metal you...

Jody Collier | 5. April 2025

7018 Back to Basics Beads

7018 Back to Basics Beads Sometimes its good to return to Basics. In this video, I am using 7018 3/32" for a 3 bead practice tee joint. I am running...

Jody Collier | 1. April 2025

312 TIG rod Repair

312 TIG rod Repair on a small high carbon pin I usually turn down little jobs like this one because they often turn into a lot more than expected. The...

Jody Collier | 31. März 2025

Stainless Sanitary Tubing and Purging

3 Banger Videos on TIG welding Stainless and Purging Tips See latest Deals on our Dual Flowmeter    

Jody Collier | 30. März 2025

Rooftop Overhead 7018 Stick Welding Video

What is Rooftop Overhead? Rooftop is a true overhead weld joint that is a great way to practice your overhead 7018 stick welding in preparation for a 4g overhead plate...

Jody Collier | 29. März 2025

Padding Beads and some Personal News

Jody Collier | 20. März 2025

TIG Welding Overhead 4F 11ga Steel

TIG Welding overhead is not that different than TIG welding flat or horizontal. Its just awkward at first.    Once you figure out how to get comfortable, it gets a...

Jody Collier | 14. Februar 2025

Tips for Aerospace Weld Test Practice on Carbon Steel

Get some cheap practice for an Aerospace Welding Test If you are at all interested in getting an aerospace welding job, this video is one of many that I hope...

Jody Collier | 12. Februar 2025

Tips for Vertical Uphill with 7018

3 videos - Tips for Stick Welding Uphill with 7018   Back to Basics Vertical Uphill Welding with 7018 Stick rods Ever heard me talk about CLAMS? CLAMS is simply...

Jody Collier | 12. Februar 2025

TIG Aluminum Travel Speed & Feeding the Filler Rod

Jody Collier | 9. Februar 2025

MIG & TIG Welding with PrimeWeld MTS200

1/4" Thick Lap Joint PrimeWeld MTS200 This first video is a super quick one showing settings that are a bit lower than what the MIG chart settings recommend. The recommended...

Jody Collier | 8. Februar 2025

Aluminum 2G Butt Joint - full Penetration

Preliminary welding procedure Is a full penetration bead on plate  the same as a weld joint?  Well it depends. If it's a butt joint with no gap at all and a...

Jody Collier | 7. Februar 2025

Tips for TIG Welding Carbon Steel

11ga Carbon Steel Tee Joint Made Simple I used the PrimeWeld TIG225 at 120 amps full pedal. 3/32" 2% lanthanated tungsten   ER70S-2 AND -6 1/16" diameter TIG rod Jazzy 10...

Jody Collier | 6. Februar 2025

ER70S-2 or ER70S-6? for TIG welding Carbon Steel

What is the best filler rod for TIG welding carbon steel? Is it good old ER70s-2? or ER70s-6 with higher silicon content? The differences between ER70S-2 and ER70S-6 are pretty subtle for...

Jody Collier | 5. Februar 2025

#7 Clear Cup Combo Kit For Aluminum

Lucky 7 Clear Cup Combo  Kit on Aluminum For quality Welding Gear https://weldmongerstore.com/ There are lots of opinions on what is the best tig cup for aluminum. Some prefer a...

Jody Collier | 4. Februar 2025

TIG Tips for Carbon Steel Restarts

TIG welding Carbon Steel lap joint and Restart Practice Making a smooth Restart on a TIG weld is a skill worth practicing. There are plenty of reasons why... You might...

Jody Collier | 3. Februar 2025

Practice those TIG Restarts

Making a smooth Restart is a skill worth practicing I packed a lot into this video. First off, its a great video showing details, settings, techniques as well as close...

Jody Collier | 3. Februar 2025

How to TIG Weld Carbon Steel with Arc shots Details, and Settings

What is the best filler rod for TIG welding carbon steel? Is it good old ER70s-2? or ER70s-6 with higher silicon content? The differences between ER70S-2 and ER70S-6 are pretty subtle for...

Jody Collier | 25. Januar 2025

Scratch Start TIG and Walking the Cup on Plate PrimeWeld MTS200

Walking the Cup on Plate with Scratch Start TIG - PrimeWeld MTS200 The MTS200 is mostly thought of as a MIG welder but it also does Stick and lift arc...

Jody Collier | 7. Januar 2025

Weld It All: A Recap of My 2024 Welding Videos

Jody Collier | 31. Dezember 2024

Tungsten Angles, CK Tungsten Grinder, & 2% Thoriated on Aluminum

Can you weld aluminum with 2% thoriated?  Yes you sure can. Is 2% thoriated the best choice for aluminum?  Nah. Probably not.  But if you prep the tip before welding, it...

Jody Collier | 9. Dezember 2024