CK Worldwide / Weldmonger™ Stubby Gas Lens Kit #17,18,26 Style Torches

| Weldmonger Warehouse |

$ 82.99



Have a #17 or #26 Tig Torch and Wish Your Torch Was Smaller? 

We have good news! Weldmonger's Stubby Gas Lens Kit fits both #17 and #26 Series TIG torches. Now you'll be able to squeeze into those tight spots with small gas lens style cups normally used on a 9 or 20 Tig torch!

(Note: This kit is not compatible with a #9 or #20 torch)

Click here to save money by bundling this kit with TIG Fingers™!




Here is What is Included:

  • 1/16", 3/32" & 1/8" ( 1.6mm, 2.4mm, and 3.2mm) size collets and gas lens collet bodies
  • 3 aluminum cups (#6, #7, #8 size)
  • Heat shield adapter
  • Short and long back cap
  • All 100% sourced from CK Worldwide
This kit even comes with 2% lanthanated electrodes in 1/16", 3/32" & 1/8" ( 1.6mm, 2.4mm, and 3.2mm), one of each size!

Kit Features:

You can shorten the total length of a big torch by over half with this kit, along with the small back cap, and get into those tight spots! This kit fits all 17 & 26 Series Air Cooled torches, including the Lincoln PTA-17 and PTA-26 torches, Miller Diamondback DB17 and DB 26 torches, along with the Weldcraft LS-17, WP-17 and WP-26 torches. These pieces fit imported torches as well!

Jody's Two Cents:

"The most common TIG torch is an air cooled #17 style torch. It's what I learned with, and it's fine for practicing welding on a bench where nothing is in your way, but as soon as you start tackling real jobs, you realize that something is almost always in your way. 

Whether it's a cluster joint with a tight angle on a roll cage, or a doubler on the inside of a piece of square tubing, or making a weld on a boiler tube where other tubes are only an inch away, a Stubby Gas Lens Kit turns a big torch into a much smaller torch that can still handle the amperage.

The gas lens will give you better gas shielding than the standard cups, too. So your stainless welds will look better. If you have ever used a small style TIG torch (a #9 air cooled, or a #20 water cooled), it's hard to go back to a big torch. A #9 air cooled torch is nice and small but just won't handle welding for very long over 100 amps. A #20 torch is water cooled and you can spend nearly $1000 on a water cooled torch, fittings, coolant, and cooler. 

With a Stubby gas lens kit, you get the best of both worlds— affordability, the simple setup of an air-cooled torch, the ability to weld at higher amperage than a small #9 torch, and better gas shielding from the gas lens.

This kit is a no brainer.

You might even want to add a Jazzy 10 ceramic cup to your cart for even better gas shielding and longer stickout!"


________________________________________________

What Series/Number is my Torch?  Knowing the style of your torch takes the guesswork out of finding consumables and replacement parts.

2 Series(#9/#20):  torches include 9, 20, 100, 110, 130, 200, 230FL2L, CKM230, CWH230, WCM230 torches and other popular torches of Weldcraft, Lincoln, WeldTec and Profax with similar models.

3 Series(#17/#18/#26):  torches include 17, 18, 26, 150, 210, 300, 510, Trimline, FL3L, CKM350, CWHTL300, CWH350, CWM350 and other popular torches of Weldcraft, Lincoln, WeldTec and Profax with similar models.

If you need any more help finding out what style torch you have, contact us today at (833)-308-7018


Customer Reviews

Based on 40 reviews Write a review
Customer Reviews
4.8 Based on 35 Reviews
Write a Review Ask a Question
  • Reviews
  • Questions

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
BM
11/04/2019
Bruce M.
United States United States
CK Stubby Gas Lens Kit is great!

Looks like I'm able to use less gas with these lens kits plus being able to get into smaller spaces is a win, win. I'm new to TIG welding and anything that will ease my efforts is a big plus for me.

NG
09/26/2019
Nathan G.
United Kingdom United Kingdom
Stubby gas lens kit

Great kit, really nice gas lenses. The free tungsten was a nice touch. The free tig finger bundle with my order was a real bonus.

PH
07/05/2016
Patrick H.
What a difference

Before having this kit my welding repairs always needed to be shined up. After using this kit on my scratch start setup there is no comparison. Flicking out always left quite the nastiness behind, now i can flick out and cover and restart without filling *** much or taking a grinder with me everywhere. My torch doesnt wear me out any more and you can fit this thing everywhere. Thanks Jody love the kit, case, and all of your useful videos.

DH
06/15/2016
Don H.
Great Product/Excellent Customer Service

I purchased Stubby Gas Lens Kit with the bonus dvd and could not be more satisfied with the product and the customer service from the Weldmonger store. The kit arrived arrived without the dvd, but when notified of the problem it was corrected immediately and with a generous inclusion of a TIG Finger as an extra. The stubby kit is well worth the cost and has performed well beyond my expectations. I can also say the same for the TIG Finger. The videos are worth the cost of the kit alone. Thanks Weldmonger! You've got a loyal customer.

NL
11/28/2015
Nick L.
Don't hesitate! This kit rocks!

If you're like me you probably are debating weather or not to buy this, I mean 80 bucks can be spent a lot of different ways, all I can say is I wish I bought this kit a long time ago! Everything jody says about the benefit of a stubby kit is true, but for me I find the stubby wide lenses give me a much better control when walking the cup. I always had trouble with the standard length nozzles and lenses because they create a longer axis which translates to faster and less control when walking the cup. The dvd was interesting to watch, great way to **** some time on a lazy day and some awesome info I'd never seen or heard before.

QUESTIONS & ANSWERS

          Powered by Top Rated Local®
          x
          x