SPARC Single Argon CO2 Flow Meter MIG/ TIG (0 to 60 CFH CGA580 Inlet Flowmeter)
| Weldmonger Warehouse |
SPARC regulator / flow meter combos are great for MIG and TIG welding.
Backed by SPARC'S 2 year warranty against manufacturing defects.
CGA580 connection for standard gas bottles from any supplier.
The output flow is adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube, so this flowmeter will handle MIG and TIG welding both steel and aluminum. The inlet fitting is CGA580 fitting, so it fits all argon, helium, nitrogen, and argon/CO2 mixed gas tanks. This does not fit straight CO2 cylinders.
The flowmeter outlet will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. You can see the adapter in the picture. It comes with a standard 1/4" barbed fitting. If you have a Miller, Lincoln, or Hobart welder, the gas hose from your machine should screw right in, as they should use the 5/8" x 18 male portion. There are NO GASKETS or WASHERS to get the fittings to seal like other cheaper regulators sold that do not use the standard N-24 nut and NP-72 outlet.
The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi. This flowmeter does not use a diaphragm, so it is more reliable than the flow-gauge style regulators.
quality piece, works great. hose barb was a little large for my hose but it works. miller 220 ac/dc
Couldnt be happier! No more concerns on my end with too little/too much flow of the Argonians into the weld border!
Simple plug and play on Miller Max Star.
Great flowmeter at a great price. I got this one to replace the stock regulator which would creep up in CFH on its own and waste gas. I set the flow on this one and it stays where it's set. Had all the fittings I needed to hook it up.
Used on Argon for TIG. Very happy. Shipped next day. Took a week to receive but no fault of Weldmonger.