2 inch Pipe 2G TIG Root-Fill-Cap
2 inch pipe welding 2g pipe welding is when the axis of the pipe is vertical and the weld is horizontal. This is a very common weld for boilermakers except...
Jody Collier |
-
2 inch Pipe 2G TIG Root-Fill-Cap
-
ER70S-2 or ER70S-6? for TIG welding Carbon Steel
ER70S-2 or ER70S-6? for TIG welding Carbon Steel
What is the best filler rod for TIG welding carbon steel? Is it good old ER70s-2? or ER70s-6 with higher silicon content? The differences between ER70S-2 and ER70S-6 are pretty subtle for...
Jody Collier |
-
Uses for Different TIG cups - Navigator Kit
Uses for Different TIG cups - Navigator Kit
We listened to our customers and put together this new TIG cup Kit. We named this kit the "Weldmonger Navigator Kit." (Not only does the Navigator kit include the most popular...
Jody Collier |
-
-
TIG Techniques for Limiting Distortion and Avoiding Cracks
TIG Techniques for Limiting Distortion and Avoiding Cracks
This video shows Techniques for Limiting Distortion and Avoiding Cracks The backstep technique is when you weld a short section and then back up behind that weld and make another short...
Jody Collier |
-
PrimeWeld TIG325x, AC Frequencies, & Clear Cups
PrimeWeld TIG325x, AC Frequencies, & Clear Cups
AC Frequency settings of 150hz and higher can really help focus the arc cone. It seems to work a lot like using high speed pulse settings for steel. In this...
Jody Collier |
-
TIG Welding Hot and Fast on Carbon Steel
TIG Welding Hot and Fast on Carbon Steel
Here is a short video on tig welding a carbon steel Tee joint. Just a quick reminder that we have couple of deals still going on. Free stronghand tig...
Jody Collier |
-
TIG Welding Carbon Steel, Chromoly, Stainless, Aluminum, and Titanium
TIG Welding Carbon Steel, Chromoly, Stainless, Aluminum, and Titanium
Our Weldmonger TIG pro kit has a cup for every situation. Sometimes I get asked "What is the best all around TIG cup?" and of course the answer is...
Jody Collier |
-
AC Frequency Settings for Stacking Beads on Aluminum
AC Frequency Settings for Stacking Beads on Aluminum
AC frequency settings for buildup beads on aluminum. Alternating Current (AC) is where the direct of the flow of electricity switches rapidly from positive to negative. AC is used for...
Jody Collier |
-
-
What is Autogenous Welding?
What is Autogenous Welding?
"Autogenous" is a five dollar word that means welding without filler metal. 3 examples that are shown in this video are: lap joint on 16 ga stainless steel sanitary tubing...
William Collier |
