Aluminum TIG Tips I Learned Making TIG Finger Displays

Aluminum TIG Welding Tips - AC Frequency Settings, Pulse Settings, Tack Welding I would like to get my TIG Finger® in more local welding supply stores so I made a...

Jody Collier | 1. März 2026

TIG Aluminum for Beginners - Beads without Filler Rod

This page goes with our "How to TIG Weld Aluminum" beginners guide. If you landed here on accident, here are some good links for other tig welding posts How to...

Jody Collier | 21. Februar 2026

10 Rules of the Road for TIG Welding Aluminum

10 "Rules of the Road" for TIG  Welding Aluminum RULE #1. Only weld aluminum that is clean enough (new aluminum is often clean enough. Dirty aluminum needs cleaning)   RULE...

Jody Collier | 14. Februar 2026

TIG Welding Aluminum Beads using Filler Rod

This page goes with our "How to TIG Weld Aluminum" beginners guide. If you landed here on accident, here are some good links for other tig welding posts How to TIG...

Jody Collier | 12. Februar 2026

Aluminum Butt Joint and Tee Joint Techniques and Settings

Aluminum Butt Joint and Tee Joint 1/8" thickness Aluminum butt and tee. 140 amps using foot pedal (actual amperage used around 115-135) 6 Stubby Gas Lens 3/32" 2% lanthanated 3/32"...

Jody Collier | 12. Februar 2026

Padding and Stacking Aluminum Beads

Padding Beads on  aluminum If you are new to TIG welding aluminum and want to get better quickly without spending a lot on practice metal, this is for you. Padding...

Jody Collier | 12. Februar 2026

Back to Basics TIG Welding Aluminum

Back to Basics: TIG Welding Aluminum How to TIG weld aluminum How to TIG weld stainless steel How to TIG weld carbon steel Aluminum TIG welding has a reputation for...

Jody Collier | 4. Januar 2026

ALUMINUM FILLER METAL SELECTION

ALUMINUM FILLER METAL SELECTION FILLER METAL IN STOCK NOW AT WELDMONGER.COM There are hundreds of different aluminum alloys.  So then how do you know how to select the right filler...

Jody Collier | 4. Januar 2026

TIG Welding Practice Skill Drills

How to Practice TIG Welding - A Proven Structured method Practice should be structured, not random. Here is a Simple but proven Training plan with skill drills designed to use...

Jody Collier | 31. Dezember 2025

How to TIG Weld: A One-Page Guide - Simple Rules of Thumb

One page TIG Welding "Rules of Thumb" Guide A Rule of Thumb is a broadly accurate guide or principle, based on experience or practice rather than theory. I use a...

Jody Collier | 30. Dezember 2025

Ten "RIGHTS" of TIG Welding Aluminum

TIG Welding Aluminum  Do these 10 Things Right and You Won't go Wrong   1. Right metal prep ..Make sure metal is clean enough How clean is clean enough for...

Jody Collier | 24. Dezember 2025

MasterClass in TIG Welding Aluminum all in One Video

This is the Video on How to TIG Weld Aluminum I Wish I had when I was learning.The Video above explains and Demonstrates everything listed below and more. Simplified settings...

Jody Collier | 17. November 2025

Learn How to Learn How to TIG Weld

Learning How to Learn: What TIG Welding and Golf Have in Common Learning any new skill can feel daunting at first.  Download our Free no BS guide to TIG welding...

Jody Collier | 3. Oktober 2025

Want better aluminum welds?

Want better aluminum welds? Don’t Strike an Arc Until You Test Your Argon Flow Learn more about this Prime Welder 325 aka PrimeWeld TIG325x How to TIG weld aluminum How...

Jody Collier | 1. September 2025

Weldmonger Podcast #2 with @deepsouthdimestacker Brad Goodman

Thanks for listening to and watching episode #2 of the Weldmonger Podcast with special guest Brad Goodman aka @deepsouthdimestacker on Instagram. In this Episode, we talk TIG welding aluminum and...

Jody Collier | 28. August 2025

TIG Tips - Aluminum Lap Joints

This video on TIG welding Aluminum Lap joints shows up close arc shots along with a technique that might help you avoid dipping your tungsten My settings and details for...

Jody Collier | 2. Mai 2025

TIG Aluminum Travel Speed & Feeding the Filler Rod

Jody Collier | 9. Februar 2025

TIG for Beginners and Common Mistakes

Jody Collier | 8. Oktober 2024

When to use 5356 vs When to use 4043 Filler Rod

When to use 4043 and when to use 5356 for TIG welding aluminum 4043 and 5356 are by far the 2 most commonly used filler metals for tig welding aluminum. If...

Jody Collier | 30. September 2024

TIG Aluminum 3G Butt Joint Full Penetration

I don't think you will find a better video anywhere on a full penetration butt joint on 1/8" (.125") 3.2mm thick aluminum. Settings matter and they are listed in the...

Jody Collier | 22. September 2024

Clear TIG Cups compared to Ceramic Cups

I don't always use clear cups. I still use ceramic cups a lot. But I can tell you one thing... When I go back to a pink ceramic cup, it's...

Jody Collier | 22. Juni 2024

PrimeWeld TIG 325x AC frequency settings

  learn more about the accessories used in this video. Primeweld tig325x TIG finger® and XL version The Weldmonger 9/20 torch gas lens kit  Stronghand Tools ARW16 rest and MRT50...

Jody Collier | 4. Juni 2024

PrimeWeld TIG325x, AC Frequencies, & Clear Cups

AC Frequency settings of 150hz and higher can really help focus the arc cone. It seems to work a lot like using high speed pulse settings for steel. In this...

Jody Collier | 16. Mai 2024

1/4" Aluminum Lap Joint Techniques - PrimeWeld TIG325x

Jody Here, Thanks for tuning in. I made a video talking about a couple deals we have going on at Weldmonger as well as some content on aluminum lap joints....

Jody Collier | 18. April 2024

TIG Welding Carbon Steel, Chromoly, Stainless, Aluminum, and Titanium

Our Weldmonger TIG pro kit has a cup for every situation.   Sometimes I get asked "What is the best all around TIG cup?" and of course the answer is...

Jody Collier | 5. April 2024

Tips for Feeding the TIG rod - How to get Better at feeding Filler wire

Feeding TIG Rod  weldmonger® stubby tig gloves white or black The video on this page is about feeding the tig rod and some tips for getting that filler rod hand up...

Jody Collier | 7. Dezember 2023

Is there a Better Way to Learn to TIG Weld?

What size cup works best? ( I chose a #7 pro clear cup for this video because its a good all around cup for both steels and aluminum)

William Collier | 5. Juli 2023