
TIG Finger = Prop in Your Pocket
TIG finger propped right next to red hot weld TIG finger and XL Version Propping and Sliding right next to HOT Aluminum weld with a TIG finger This Turntable Weld Got Hot but my fingers Stayed COOL with an XL...
TIG finger propped right next to red hot weld TIG finger and XL Version Propping and Sliding right next to HOT Aluminum weld with a TIG finger This Turntable Weld Got Hot but my fingers Stayed COOL with an XL...
2 inch pipe welding 2g pipe welding is when the axis of the pipe is vertical and the weld is horizontal. This is a very common weld for boilermakers except boilermaker welders also contend with very tight spaces. Freehand tig...
Dual flowmeter Get your weldmonger dual flowmeter here There are 2 main reasons why you need a dual flowmeter: to purge stainless steel pipe or sanitary tubing or other parts that require argon shielding on the back side the...
There are several ways to tig weld cast iron but I have had really good results tig brazing cast iron using AC and Aluminum bronze filler rod. ( thats ErCu-Al-A2) Technically, this is "TIG Brazing" and not TIG welding but...
TIG Welding Cold Rolled Steel vs 4130 or Hot Rolled Steel Have you ever noticed that when you are tig welding cold rolled steel that sometimes the puddle wanders? I have found that tig welding 4130 chromoly or even hot...
Comparing Pulse Settings vs no pulse on outside corner joints on cold rolled steel 11ga 0.120” (3mm) For this video, I compared 2 welding techniques on outside corner joints on 11ga cold rolled steel. Joint #1 was welded...