Passer au contenu
gtaw, pipe welding, tig welding pipe, tig root ,2g test

2 inch Pipe 2G TIG Root-Fill-Cap

2 inch pipe welding 

2g pipe welding is when the axis of the pipe is vertical and the weld is horizontal.

This is a very common weld for boilermakers except boilermaker welders also contend with very tight spaces.

Freehand tig welding a 2 inch pipe is a boilermakers bread and butter and if you have ever made a 2g weld on 2 inch or smaller, you know it gets pretty hot.

A TIG finger® lets you prop right next to a hot weld and lets you concentrate on making the weld instead of how hot your knuckles are getting.

A TIG finger is like Having a prop in your pocket so that you can prop on hot metal and focus on the weld.

The basic procedure for the 2 inch 2G weld is:

2 inch sched 80 carbon steel pipe

35 degree bevels 

1/8" gap

Zero land (feather edge)

1/8" ER70S6 filler

100 amps 

3/32" 2% lanth tungsten

5 stubby gas lens cup with 15 cfh argon flow

 

Article précédent Purge Tips and Weldmonger® Dual Flowmeter
Articles suivant Proper Torch Angle for TIG Welding vs Whatever it Takes

Commentaires

Oss - mai 26, 2024

Jodies weld art is CONCISE & EXPLICIT never laboured

Aboutism, hes straight to the point …….not IMPLICIT

no jargon Which is the same with best english language

His princess paints her nails as exquisitely !

Jim - mai 25, 2024

On the root pass at 3:59 and 4:04, is this considered full penetration as the edges do not appear to be fully tied in. If this were a qualification test, would it pass? I am not being critical, just curious.

Laisser un commentaire

Les commentaires doivent être approuvés avant d'apparaître

* Champs obligatoires

Powered by Top Rated Local®
RETURN TO TOP
×