Fireball Tool Dual Hex Key Holder, Aluminum - Holder Only está agotado y se enviará tan pronto como vuelva a estar disponible.
This item ships directly from Fireball Tool and is not eligible for Weldmonger free shipping promotions. Shipping is calculated separately at checkout.
Ordering other Weldmonger products? Your order may arrive in multiple shipments.
Fireball Tool Dual Hex Key Holder, Aluminum
Stop digging through drawers, fighting with plastic hex key holders, or searching the shop for the one Allen key you need.
The Fireball Tool Dual Hex Key Holder provides organized storage for both SAE/Imperial and Metric hex keys in one compact aluminum holder. Designed for quick access around the welding table, fabrication shop, toolbox, or workbench, it keeps commonly used Allen keys organized, visible, and ready to grab.
A built-in magnetic base allows the holder to stick directly to steel surfaces, while the spring-retention system keeps individual hex keys securely in place—even when the holder is upside down.
Instead of keeping separate organizers scattered around the shop, the Dual Hex Key Holder puts both systems in one convenient location.
One side accommodates 13 standard SAE/Imperial sizes, while the other holds 9 common Metric sizes.
.050"
1/16"
5/64"
3/32"
7/64"
1/8"
9/64"
5/32"
3/16"
7/32"
1/4"
5/16"
3/8"
1.5mm
2mm
2.5mm
3mm
4mm
5mm
6mm
8mm
10mm
That's storage for up to 22 commonly used hex key sizes in one organized setup.
Traditional folding sets and tightly packed factory holders can make getting one hex key out more annoying than it needs to be.
Fireball Tool designed this holder so each individual key can be removed and replaced independently.
Grab the size you need, use it, and put it right back in its designated location without moving or rearranging the rest of the set.
A built-in spring applies enough tension to keep the hex keys securely seated in the holder.
The retention is strong enough that the keys can remain in place even when the holder is turned upside down, while still allowing individual keys to be removed when needed.
That makes it particularly useful in a working fabrication shop where tools are constantly being moved around.
The integrated magnetic base allows the holder to attach directly to ferrous steel surfaces.
Stick it to your:
Welding table
Fabrication table
Steel workbench
Welding cart
Toolbox
Machine enclosure
Steel cabinet
Shop equipment
The magnetic base also makes it easy to grab or replace a hex key with one hand while the holder stays in position.
Hex keys are used everywhere in a welding and fabrication shop—from adjusting fixture table accessories and welding equipment to working on machines, tools, clamps, and shop equipment.
Keeping both SAE and Metric sizes organized in one visible location means less time searching through drawers and more time getting the job done.
The Fireball Tool Dual Hex Key Holder is compatible with sleeveless hex keys where the body size matches the head size.
This makes the holder useful even if you already have your own compatible SAE and Metric hex key sets.
Choose the configuration that works for your shop:
Holder Only
Holder + Keys
Already have a good set of compatible hex keys? Grab the holder and organize what you have.
Need the complete setup? Choose the Holder + Keys option and get everything together.
Holds both SAE/Imperial and Metric hex keys
Stores up to 22 common hex key sizes
13 SAE/Imperial positions
9 Metric positions
Durable aluminum holder
Integrated magnetic base
Spring-loaded key retention
Holds keys securely—even upside down
Individual keys can be removed without moving the others
Easy one-handed access when mounted to steel
Clearly organized individual key positions
Compatible with sleeveless hex keys where body and head sizes match
Available as Holder Only or Holder + Keys
Great for welding tables, fabrication shops, toolboxes, machine shops, and workbenches
Allen keys have a habit of disappearing exactly when you need them.
The Fireball Tool Dual Hex Key Holder gives your SAE and Metric hex keys a dedicated home where they're organized, easy to identify, and within reach.
Stick it to the side of your welding table or toolbox, grab the size you need with one hand, and put it right back when you're finished.
22 sizes. Two measurement systems. One organized holder.
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information. If you prefer to pay by phone, call us toll free at 1-833-308-7018
Fireball Tool develops purpose-built tools for welders, fabricators, machinists, and makers who expect more from their shop equipment.
From innovative welding squares and fixture-table systems to clamps, layout tools, hand tools, and shop accessories, Fireball products are designed around solving real fabrication problems.
Weldmonger is proud to offer Fireball Tool products alongside the welding equipment and accessories we use and recommend every day.
Fireball Tool Magnetic 1-2-3 Blocks
Fireball Tool Minion Square (Pair)
Fireball Tool 1826 Combination Square
Fireball Tool Lumber Maximus Clamp 2" x 4" (Single Clamp Set)
Fireball Tool Maximus Bar and Dog Clamp (2 Sets of Clamps)
Fireball Tool Magnetic Hex Key Holder (ABS)
Fireball Tool Mystic Square 16"
Fireball Tool products purchased through Weldmonger are fulfilled and shipped directly from Fireball Tool.
No. Fireball Tool products are excluded from Weldmonger free shipping promotions. Applicable shipping charges are calculated separately at checkout.
Because Fireball Tool products ship directly from Fireball Tool, your order may arrive in multiple shipments.
Yes. Tracking information will be provided once it becomes available for your shipment.
Delivery times depend on your location and selected shipping service. Fireball Tool currently states that processed orders generally take 5–7 business days to arrive.
If you purchased through Weldmonger, contact the Weldmonger team with your order information and we'll help you out.
Stop digging through drawers, fighting with plastic hex key holders, or searching the shop for the one Allen key you need.
The Fireball Tool Dual Hex Key Holder provides organized storage for both SAE/Imperial and Metric hex keys in one compact aluminum holder. Designed for quick access around the welding table, fabrication shop, toolbox, or workbench, it keeps commonly used Allen keys organized, visible, and ready to grab.
A built-in magnetic base allows the holder to stick directly to steel surfaces, while the spring-retention system keeps individual hex keys securely in place—even when the holder is upside down.
Instead of keeping separate organizers scattered around the shop, the Dual Hex Key Holder puts both systems in one convenient location.
One side accommodates 13 standard SAE/Imperial sizes, while the other holds 9 common Metric sizes.
.050"
1/16"
5/64"
3/32"
7/64"
1/8"
9/64"
5/32"
3/16"
7/32"
1/4"
5/16"
3/8"
1.5mm
2mm
2.5mm
3mm
4mm
5mm
6mm
8mm
10mm
That's storage for up to 22 commonly used hex key sizes in one organized setup.
Traditional folding sets and tightly packed factory holders can make getting one hex key out more annoying than it needs to be.
Fireball Tool designed this holder so each individual key can be removed and replaced independently.
Grab the size you need, use it, and put it right back in its designated location without moving or rearranging the rest of the set.
A built-in spring applies enough tension to keep the hex keys securely seated in the holder.
The retention is strong enough that the keys can remain in place even when the holder is turned upside down, while still allowing individual keys to be removed when needed.
That makes it particularly useful in a working fabrication shop where tools are constantly being moved around.
The integrated magnetic base allows the holder to attach directly to ferrous steel surfaces.
Stick it to your:
Welding table
Fabrication table
Steel workbench
Welding cart
Toolbox
Machine enclosure
Steel cabinet
Shop equipment
The magnetic base also makes it easy to grab or replace a hex key with one hand while the holder stays in position.
Hex keys are used everywhere in a welding and fabrication shop—from adjusting fixture table accessories and welding equipment to working on machines, tools, clamps, and shop equipment.
Keeping both SAE and Metric sizes organized in one visible location means less time searching through drawers and more time getting the job done.
The Fireball Tool Dual Hex Key Holder is compatible with sleeveless hex keys where the body size matches the head size.
This makes the holder useful even if you already have your own compatible SAE and Metric hex key sets.
Choose the configuration that works for your shop:
Holder Only
Holder + Keys
Already have a good set of compatible hex keys? Grab the holder and organize what you have.
Need the complete setup? Choose the Holder + Keys option and get everything together.
Holds both SAE/Imperial and Metric hex keys
Stores up to 22 common hex key sizes
13 SAE/Imperial positions
9 Metric positions
Durable aluminum holder
Integrated magnetic base
Spring-loaded key retention
Holds keys securely—even upside down
Individual keys can be removed without moving the others
Easy one-handed access when mounted to steel
Clearly organized individual key positions
Compatible with sleeveless hex keys where body and head sizes match
Available as Holder Only or Holder + Keys
Great for welding tables, fabrication shops, toolboxes, machine shops, and workbenches
Allen keys have a habit of disappearing exactly when you need them.
The Fireball Tool Dual Hex Key Holder gives your SAE and Metric hex keys a dedicated home where they're organized, easy to identify, and within reach.
Stick it to the side of your welding table or toolbox, grab the size you need with one hand, and put it right back when you're finished.
22 sizes. Two measurement systems. One organized holder.
Set
