10 Rules of the Road for TIG Welding Aluminum
10 "Rules of the Road" for TIG Welding Aluminum RULE #1. Only weld aluminum that is clean enough (new aluminum is often clean enough. Dirty aluminum needs cleaning) RULE...
Jody Collier |
-
10 Rules of the Road for TIG Welding Aluminum
-
Aluminum Butt Joint and Tee Joint Techniques and Settings
Aluminum Butt Joint and Tee Joint Techniques and Settings
Aluminum Butt Joint and Tee Joint 1/8" thickness Aluminum butt and tee. 140 amps using foot pedal (actual amperage used around 115-135) 6 Stubby Gas Lens 3/32" 2% lanthanated 3/32"...
Jody Collier |
-
Padding and Stacking Aluminum Beads
Padding and Stacking Aluminum Beads
Padding Beads on aluminum If you are new to TIG welding aluminum and want to get better quickly without spending a lot on practice metal, this is for you. Padding...
Jody Collier |
-
Back to Basics TIG Welding Aluminum
Back to Basics TIG Welding Aluminum
Back to Basics: TIG Welding Aluminum How to TIG weld aluminum How to TIG weld stainless steel How to TIG weld carbon steel Aluminum TIG welding has a reputation for...
Jody Collier |
-
Ten "RIGHTS" of TIG Welding Aluminum
Ten "RIGHTS" of TIG Welding Aluminum
TIG Welding Aluminum Do these 10 Things Right and You Won't go Wrong 1. Right metal prep ..Make sure metal is clean enough How clean is clean enough for...
Jody Collier |
-
MasterClass in TIG Welding Aluminum all in One Video
MasterClass in TIG Welding Aluminum all in One Video
This is the Video on How to TIG Weld Aluminum I Wish I had when I was learning.The Video above explains and Demonstrates everything listed below and more. Simplified settings...
Jody Collier |
-
Want better aluminum welds?
Want better aluminum welds?
Want better aluminum welds? Don’t Strike an Arc Until You Test Your Argon Flow Learn more about this Prime Welder 325 aka PrimeWeld TIG325x How to TIG weld aluminum How...
Jody Collier |
-
Weldmonger Podcast #2 with @deepsouthdimestacker Brad Goodman
Weldmonger Podcast #2 with @deepsouthdimestacker Brad Goodman
Thanks for listening to and watching episode #2 of the Weldmonger Podcast with special guest Brad Goodman aka @deepsouthdimestacker on Instagram. In this Episode, we talk TIG welding aluminum and...
Jody Collier |
-
.063" Aluminum Corner TIG Settings - Quick Set Video
.063" Aluminum Corner TIG Settings - Quick Set Video
How to TIG weld aluminum How to TIG weld stainless steel How to TIG weld carbon steel Having the exact Settings won't turn a bad welder into a good welder...
Jody Collier |
-
TIG Tips - Aluminum Lap Joints
TIG Tips - Aluminum Lap Joints
This video on TIG welding Aluminum Lap joints shows up close arc shots along with a technique that might help you avoid dipping your tungsten My settings and details for...
Jody Collier |
-
-
#7 Clear Cup Combo Kit For Aluminum
#7 Clear Cup Combo Kit For Aluminum
Lucky 7 Clear Cup Combo Kit on Aluminum For quality Welding Gear https://weldmongerstore.com/ There are lots of opinions on what is the best tig cup for aluminum. Some prefer a...
Jody Collier |
-
When to use 5356 vs When to use 4043 Filler Rod
When to use 5356 vs When to use 4043 Filler Rod
When to use 4043 and when to use 5356 for TIG welding aluminum 4043 and 5356 are by far the 2 most commonly used filler metals for tig welding aluminum. If...
Jody Collier |
-
TIG Aluminum 3G Butt Joint Full Penetration
TIG Aluminum 3G Butt Joint Full Penetration
I don't think you will find a better video anywhere on a full penetration butt joint on 1/8" (.125") 3.2mm thick aluminum. Settings matter and they are listed in the...
Jody Collier |
-
PrimeWeld TIG 325x AC frequency settings
PrimeWeld TIG 325x AC frequency settings
learn more about the accessories used in this video. Primeweld tig325x TIG finger® and XL version The Weldmonger 9/20 torch gas lens kit Stronghand Tools ARW16 rest and MRT50...
Jody Collier |
-
TIG Welding Carbon Steel, Chromoly, Stainless, Aluminum, and Titanium
TIG Welding Carbon Steel, Chromoly, Stainless, Aluminum, and Titanium
Our Weldmonger TIG pro kit has a cup for every situation. Sometimes I get asked "What is the best all around TIG cup?" and of course the answer is...
Jody Collier |
-
AC Frequency Settings for Stacking Beads on Aluminum
AC Frequency Settings for Stacking Beads on Aluminum
AC frequency settings for aluminum using the prime welder 225x and 325x aka PrimeWeld TIG225x & 325X Aluminum build up using different AC frequency settings with the Primeweld TIG325x (aka...
Jody Collier |
-
