Passer au contenu
Due to severe winter weather, our facilities will be closed 1/10-1/13. All orders will ship on 1/14. Thank you for your understanding.
Due to severe winter weather, our facilities will be closed 1/10-1/13. All orders will ship on 1/14. Thank you for your understanding.
About Us Tig Finger® Sign Up For Insider Access Contact Us
Wholesale Identify WeldingTips&Tricks Write a Review ⭐️
TIG Welding Stainless Steel Tips and Techniques on 1/4" and .056" (1.4mm)
octobre 7, 2023 Jody Collier

TIG Welding Stainless Steel Tips and Techniques on 1/4" and .056" (1.4mm)

Tig welding stainless steel 

Please leave your comments on what videos you would like to see here as well as what products you would like to see on our store here at Weldmonger.

This video shows tig welding a 2 pass fillet weld tee joint on 1/4" stainless steel.

Then it shifts gears into a .056" (1.4mm) lap joint.

A Furick jazzy #10 ceramic cup is one of my favorite cups for tig welding stainless steel, cold rolled steel, and 4130 chromoly.

P.S If you already tried the ceramic, and you want to give the glass a try.. Here is a link to the Furick jazzy #10 glass cup. 

We made a special bundle for you that includes a 2 pack of Jazzy 10 ceramic cups, a TIG finger®, and a gas lens adapter kit that not only works with the jazzy 10 cups but also lets you use any other Furick cup like the 8 pro clear cup.

This bundle is a no brainer for you if you TIG weld stainless or chromoly.

Primeweld made a graphic with the common weld defects in welding stainless steel. Check that out below. 

You can find the original article it came from on their website at "How To Weld Stainless Steel"

Article précédent Weldmonger Customer Quick Tip Video #4 Stick Welding with TIG torch

Commentaires

Aaron - octobre 8, 2023

Hello,
Maybe a review and your impression of the available filler rod feeder tools.
Thank you.

scotty garrett - octobre 8, 2023

I would like to see some videos with tips and techniques while welding very light weight sheet steel metal that would include equipment, settings, distortion control and embrittlement reduction.

Roy - octobre 8, 2023

Thanks for your videos…I’ve been following you for many years…I’m a CWI and a welder.

Robert Allnutt - octobre 8, 2023

Thank you for another great video.

Roger McMullin - octobre 8, 2023

Jody:
You’re a skilled welder but a gifted teacher. Thanks for your efforts to make us better TAG welders.

Robert Lindall - octobre 8, 2023

Have you done J bevel, consumable ring on Sch 80 6" pipe? (Root Pass only unless you want to complete the weld with 7018 stick.)
Thanks, Bob

Charles - octobre 8, 2023

I’d like to see welding tips specifically for 0.9mm or 1.0mm sheet metal panels as in the automotive repair and fabrication industry. Thanks

Nathan Helm - octobre 7, 2023

Hey Jodi was wondering when you were going to have aargon gas bottles available again also if you could add shield gas flow test gauges back on the store thanks for all you do!

Laisser un commentaire

* Champs obligatoires

Powered by Top Rated Local® RETURN TO TOP